6 Common Stihl MS 211 Problems and Solutions

The MS 211 is one of the best models of Sthil chainsaws. It is equipped with cutting-edge technology, including a powerful, reduced emission, fuel-efficient engine. With a scientifically designed pre-separation air filtering technology, it also minimizes your maintenance. That is not all, this chainsaw also has advanced features like Anti-Vibration System and Ematic Lubrication System.

When you use a chainsaw for a long time, you will run into difficulties that will need to be fixed in order for it to continue to function properly regardless of its brand. Stihl chainsaws are no exception. Starting problems, starting then stopping, rattling or losing chain, poor cuts, engine idling, etc. are the common issues of the Stihl MS 211 chainsaw. In this article, we are going to talk about the issues so that you can know the causes behind them and solve them easily.

Common Problems of Stihl MS 211:

You will see that Stihl MS 211 has fewer problems than its previous models as it is made with advanced technology. However, when you encounter any problems, there are some simple solutions that you can apply and solve the issues without calling any mechanic or expert.

So, the common problems of Stihl MS 211 are discussed below:

1. Starting problems

If your chainsaw is not starting, then, there can be several reasons for it except for not having fuel. Your chainsaw might not start in extremely cold weather. In that case, you need to give some time to warm up the engine for starting.

Another reason for your chainsaw not to start can be a clogged carburetor. It can be caused by not cleaning it for a long time or leaving fuel inside the chainsaw without using it for a long duration of time. As time pass by the fuel becomes thick and sticky, so when it vaporizes the sticky substance gets stuck to the wall and makes the carburetor clogged. This ultimately stops the engine from taking start properly. You need to clean the carburetor properly for your chainsaw to start if it is clogged.

2. Starting then stopping

If you experience your chainsaw starting and then stopping suddenly;y, then your chainsaw has running issues. This is caused by a blocked air filter. When the air filter is blocked with dirt and debris the chainsaw’s engine can not get sufficient air supply. So, it can not function properly. To function effectively, your chainsaw’s engine needs a sufficient supply of air.

If you want to solve the issue then you need to remove the air filter from your chainsaw. Wash it or replace it if it is blocked with debris or too dirty.

3. Rattling or loose chain

Rattling or losing chains is a common problem of chainsaws. It happens due to faulty tension or improperly installed tension. The most likely reason your chain does not turn around the bar smoothly is that the tension needs to be adjusted. The solution to this issue is to adjust the tension every 15 minutes while the machine is running or while it is hot. It needs to cool after every 15 minutes so the metal in the chain contracts and gives you a proper fit without the bar being bent.

You can adjust your chain tension by loosening two bar nuts found on the saw’s side. Use a flat head screwdriver to turn the tensioning screw while holding the nose of the bar slightly up.

4. Rewind spring problems

The rewind spring recoils the starting rope onto a pulley when it is pushed and released. The rope will not be able to rebound onto the chainsaw pulley if the rewind spring is damaged. As a result, starting the machine might be nearly impossible.

You will need to replace the rewind spring if it is broken. Many rewind springs may be replaced separately, however replacing the entire recoil starter system may be easier.

5. Poor cuts

Poor cuts are the sign of worn or dull blades. Or the blades can be damaged somehow. Try changing the blades for any improvements in the cut quality. If it still does not cut properly, then check if the blades have been properly installed or not.

6. Engine idling

If your chainsaw starts but keeps on idling without working, then it might need proper troubleshooting. The usual reason for engine idling is often debris stuck in the components of the chainsaw, special in the air filter component. Give your chainsaw a good clean following the instruction manual. If this does not solve your problem, you might need to replace the air filter. Because when too many clogs get stuck to the surface, the substance gets so sticky that it becomes impossible to clean. In that case, you are left with no choice but to replace the part. 

Frequently Asked Questions

How many cc is a STIHL MS 211?

The Stihl MS 211 is 35.2 cc. This patented 50:1 fuel mixture combines non-ethanol, high-octane fuel, and premium STIHL HP Ultra Oil.

What does MS mean on STIHL chainsaws?

MS on Stihl chainsaw means Motorsäge. Model names start with MS, MSA, or MSE on every chainsaw made by STIHL. MS stands for Motorsäge, which translates as “chainsaw” in German. It’s a battery chainsaw, according to MSA, and it’s an electric one, according to MSE.

What fuel does a Stihl chainsaw use?

The Stihl chainsaws always use new fuel and a minimum of 89 octane gasoline. When you buy the Stihl chainsaw, make sure to purchase only as much fuel as you can readily consume in two months. Use a quality mix of oil that fulfills the engine manufacturer’s recommendations for air-cooled, two-cycle engines.

Final Words

Stihl chainsaws are one of the best chainsaw brands in the market that you can rely on. It is very easy to use and long-lasting. The Stihl MS 211 is one of the latest models equipped with advanced features. So, even when you encounter a few issues, they are very easy to solve.

Leave a Comment