John Deere 317 is one of the best compact track loaders in the market. It can carry huge loads and can place pallets accurately. It also features the vertical lift bloom that makes its functions easier. It is mostly used in construction sites and farming lands to make the user’s tasks easy.
However, it might have some problems after some time because of handling all the hard work. Do not let those bother you as most of the problems can be resolved with a little bit of basic knowledge of problems.
If you are a construction site worker, or a farmer, then this will reduce your workload and you will be able to finish all the hard work on sites in very little time. But as it starts having problems, it gets hard to get your hard work done effectively. So, the problems should be solved as soon as possible.
Problems and Solutions of John Deere 317 Skid Steer:
Knowing about the reasons for the problems makes them easier to solve. So, the common problems and solutions of John Deere 317 Skid Steer are given below:
1. Starting problems
There are no vehicles that do not go through starting problems. When a vehicle has this problem, most of the time, it starts eventually, after charging or checking the battery or restoring the poor connection between the wires and internal parts. But if these do not work, then you can check the fuse box. If the fuse box does not click then that is the indication of some serious problem.
Solution
Sometimes the battery runs out of charge or is dead, which causes starting problems. The problems usually go away when you just change the battery. But if that does not solve your problem you might need to take a look at the fuse box, as the main culprit can be the fuse box, replacing the fuse box might solve the problem.
2. Valve keeps on sticking
Valve is the part that controls the lift arms of your John Deere track loader. So, when it is stuck, it can not lift the heavyweight stuff, and it becomes hard to work at the construction site. If you are lucky, then you can often control it with foot control, but sometimes it does not work and it will keep going down or up till you make the pedal in neutral.
Solution
This can happen because of the debris or burr stuck around the valve. Cleaning it properly might solve the problem. If it does not, then you can try raising the boom and let go of the controls to solve it.
If this does not solve anything, check if a bolt is not too tight on a pivot point binding up the vehicle’s lineage. Loosen the bolt if needed. If this does not solve your problem, the control spool might be rubbing against the control valve housing because of something in the lubrication grooves of the spool. Also, make sure that the centering spring is moving freely against the tension. The control spool should not be moved without a boom stop or propelled.
3. Hydraulic problems
If you find that the bucket of JD 317 is not curling or the boom is not lowering or rising, then it might be because of hydraulic problems.
Solution
Often seat switch issues cause hydraulic problems to JD 317 Skid Steer. But you also need to make sure of the exact problem.
You will find on the hydraulic control valve spools there are 2 lock-out solenoids. You have to take the floorboard out to see them. If the user is too thin or under 200 pounds. This can be solved by carrying heavy stuff like stones or pebbles.
4. Parking brake problems
When you park the vehicle, after you have worked with it, you park it in a suitable place. But if the vehicle keeps on moving although putting it in the park, then there might be something wrong with the parking brake. If the parking brake is worn or stretched, then it will not work correctly.
Solution
You will need to repair or replace the parking brakes to solve the problem. And if this does not solve the problem, you can check out the cables too. Broken or detached cables can also cause this problem. In that case, you will need to reattach the cable if detached and replace the cables if they are broken.
5. Loader will not release
Often, the John Deere Loader does not release due to park brake problems and this is a huge problem.
Solution
You should try changing the o rings on the valve to remedy this problem. The parking brake is spring applied and pressure released, therefore if the seals for the piston that releases the brake are worn out unless the brake will not release.
Frequently Asked Questions
How much can a John Deere 317 skid steer lift?
With 57 net horsepower and 61 gross horsepower, the machine has a rated operating capacity of 1,7500 pounds and a tipping capacity of 3,700 pounds.
What is the difference between a John Deere 317 and 318?
John Deere 317 and 318 are very similar and have almost the same functions. New models were introduced, including the 318 which had an 18-horsepower Onan engine, and the 317 was retired from production.
With almost identical tractors, the 318 and the 317 differ mostly in power steering on the 318, but not on the 317. With the 317, you have a PTO and dual hydraulics on the front, but with the 318, you have a hydraulic at the rear.
Related Article:
- 6 Most Common John Deere 1025R Problems And Solutions
- 5 Most Common John Deere 317 Skid Steer Problems and Solutions
Final Words
Every vehicle eventually has problems and John Deere 317 Skid Steer, is no different. It can have some problems too. But most of the problems can be reduced with proper maintenance and regular troubleshooting.
