10 Honda HRX217HYA Problems and Solutions

It is better to use a push-behind lawn mower than a riding lawn mower if you need to do quick lawn care on a regular basis. Honda’s push-behind lawn mowers are among the most popular on the market.

The Honda lawn mowers are some of the most durable on the market, but they have a few technical issues that need resolving before you start to mow your lawn.

Otherwise, it might suddenly stop working in the middle of your lawn maintenance routine. Lawn mowers from any manufacturer can suffer this problem. Oftentimes, this type of problem can be corrected with a quick adjustment or by replacing parts.

That is why we are going to discuss 10 Honda HRX217HYA Problems and Solutions in this article.

Take the time to review the most common mower problems and the easiest ways to fix them yourself, before calling your local service facility for assistance.

10 Honda HRX217HYA Problems

Honda HRX217HYA

Identifying the reason behind the problem solves half the problem. That is why it is important to find out the problems before fixing them. So, here are the 10 most common problems of Honda HRX217HYA:

1. Hard to start

The carburetor might be clogged. The problem with starting is the most common problem of all. And there are a bunch of causes behind it.

That is why you will not be able to tell the reason for the problem just by seeing the result of the problem. The causes can be- Old or Bad Gasoline, spark plug wire damage, engine oil is finished or overfilled, defective ignition coil, clogged fuel filter, defective power switch, and many more.


The starting problem can be caused by a lot of reasons and one should act accordingly to solve the problem. But in most cases, the reason is a clogged carburetor. A carburetor cleaner can help clear a clogged carburetor

2. Smoke coming out

When you see smoke coming out of your lawn mower, then your mower might have trouble starting. When you start the mower, it stalls halfway through cutting.

As the mower runs, it sounds rough as well. There is black smoke emerging from the muffler. Then you should know that these are the symptoms of a dirty carburetor.


The fuel in a carburetor usually becomes clogged when it is left in the blade for a long time. Carburetor cleaner can be used to unclog clogged carburetors.

3. Self propel won’t propel

When a Honda self-propelled lawn mower does not pull, the belt needs to be replaced, the drive pulley needs to be replaced, and the gear pins need to be replaced.


The best way to repair it is to identify these components and replace them.

4. Keep cutting off

If your Honda HRX217HYA keeps cutting off, the carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the lawn mower for a long period of time. This sticky fuel can clog up the carburetor and cause the engine to stall.


If the carburetor is clogged, try cleaning it with a carburetor cleaner.

5. Rough running

A clogged carburetor may be causing your mower to run rough. Sticky fuel can clog the carburetor up and make it run rough. A lawnmower may hunt and surge due to a simple airflow problem. A sporadic blockage can cause an engine to slow down, especially if the air it needs isn’t getting to it.


It is possible to clean clogged carburetors with a carburetor cleaner. The carburetor may need to be rebuilt or replaced if cleaning doesn’t work.

6. Lawn mower surging

The fuel system may be faulty, which can cause this. Small holes are located throughout the gas tank cap on your mower. Fuel surging can also be caused by water in the fuel tank. It is possible for an engine to become clogged during heavy downpours or on a hot summer day.


Gas tanks should be emptied and old fuel properly disposed of before a new batch of gasoline is tried.

7. Engine is cranking

The first thing you should do if your engine is cranking is to check the spark plug for signs of damage or wear.

Using the spark plug tester, you can determine whether the plug is defective. While the engine is idle, the tester’s terminals should look for a strong spark. Spark plugs that do not generate spark should be replaced if they are defective.


The porcelain insulator should be replaced if the porcelain is cracked or damaged, or if the electrode is heavily carbonized.

8. The transmission is weak

Watch the transmission while the engine is running to ensure it is working properly. The transmission is bad if the pulley spins but the wheels do not turn.


This part is generally irreplaceable, and thus, the only option, if it breaks, is to purchase a new mower.

9. Problems with the Recoil Spring

The recoil spring recoils the starter rope onto a pulley when the starter rope is pulled and released. A broken recoil spring would prevent the rope from recoiling onto the pulley. This would result in the engine being unable to start.


It should be replaced if it is damaged. The recoil springs in many recoil starters can be swapped out individually, but it is sometimes more convenient to replace the whole assembly.

10. Problems with the Rewind Spring

The rewind spring recoils the starter rope onto a pulley when the starter rope is pulled and released. The rope will not rewind onto the pulley if the rewind spring is broken. Consequently, the engine will not start.


Rewind springs should be replaced if they are broken. It may be simpler to replace the whole recoil starter assembly than to replace a rewind spring.

Related Content: 10 Cub Cadet Zero Turn Mower Problems and solutions

Final Words

There are many types of problems that often occur with outdoor machines. Therefore, it is extremely important to regularly troubleshoot to determine the cause of the problem.

When you identify the root cause of the problem, you can then begin to find a solution. However, if you feel that you cannot handle the problem on your own then you should contact an expert. 

Leave a Comment