Path Slayer vs Lane Shark : Which One Should You Buy?

The Mini Path Slayer is a bush cutter installed on a front-end tractor that can handle tasks like steep road and shooting lane mowing. It is perfect for managing planting rows, ponds, hillsides, holding lakes, and canals. The Lane Shark LS-3 is a gentle circular cutter intended for modest land maintenance, general upkeep, and clearing overgrown roads.

Both these products are similar in their offerings and benefits. But they are supposed to perform in different situations. So, it is of no use to compare them based on their offering, but to make the purchasing decision solely on your intended purpose.

The main differences between Path Slayer vs Lane Shark are – Blades, Price, Compatibility and Weight. A path slayer will cost around $3500 and $5200 while a Lane Shark will cost you around $4500 to $4700. Path Slayer weighs between 390 to 577 lbs while a Lane Shark weighs less than 450 lbs.

Path Slayer vs Lane Shark : Quick Comparison

In order for you to examine the distinctions for yourself, we have listed the main variations and overlaps between the two brush cutters by putting their specs opposite each other in this table.

FactorPath SlayerLane Shark
MaterialsSteel BladesSteel Plate
BladesUnknown (Continuous welding)Double Sided
Main UsageRoadsPonds, Lakes, Hillsides
Safety FeaturesN/AN/A
InstallationUnknownHydraulic Installation
Price3500 USD to 5200 USD4500 USD to 4700 USD
CompatibilityTractors Only (Not Skid Steers)Mid-sized Tractor (Not Skid Steers)
Warranty1 Year1 Year
After-sales ServicesParts Are AvailableParts Are Available
Weight390 to 577 lbs<450 lbs

Path Slayer vs Lane Shark : Detail Comparison

We’ll now talk generally about the key distinctions and parallels among Path Slayer vs Lane Shark.


The material of the blade and body of both these brush cutters are solely made of steel. So there are no significant differences. Both of these brush cutters should give you a long-lasting service and work without any hassles.

So, it is a draw in case of build materials for these two brush cutters.


It is not mentioned anywhere if the blades of Path Slayer are single sided or double sided, but they mentioned that it offers you continuous welding. It means there will not be any single moment without work.

The blades of Lane Shark are double sided, which means they will keep rotating and cut bush from both sides. There should be a slight delay between the rotations of the blades. But that won’t be much noticeable.

The Path Slayer slightly has advantage in this section, but this is not any major difference.

Main Usage

It is clearly mentioned in the Path Slayer’s description that it is supposed to work in lakes, ponds and hillsides. It can also be used in vertical roads. So, it is made for the purpose of doing tasks that are a bit difficult.

The Lane Shark is used for roads and residential maintenance. It will not be able to handle hard tasks like pond and lake cleaning.

So, we can only say that they are made for different purposes and a clear differentiation of pain point has been made. You should prefer one depending on the task you are intending to do with the brush cutter.

Safety Features

There are no specific safety features included in both these brush cutters. They are equal in their protective measures.


There are no clear indications of how the Path Slayer will be installed in the tractor. They just said that it is a hydraulic directive, which means it runs with hydraulic pressures.

The Lane Shark on the other hand, is installed on the tractor by using hydraulic options.

We can assume that the Path Slayer needs to be installed to the tractor using hydraulic options as well. So, these two are equal in this segment. 


There are no mentions of any sort of customizable options on both these brush cutters.


The price of Compact Path Slayer is 3500 USD, while the general version is priced at 5200 USD.

The price of Lane Shark LS-2 is 4700 USD and the price is 4500 USD in case of the LS-3.

The price range of Path Slayer is a bit higher as it is designed keeping difficult tasks in mind. But if you purchase the compact version, then the price will fall dramatically compared to the Lane Shark.


Both these brush cutters are usable on tractors only. They can not be attached to the skid steers. So, the drawback is present in both products.

A slight difference is that Path Slayer can be equipped with any tractor, be it big, mid-sized or small. But the Lane Shark is usable on mid-sized tractors only.


For their respective machines, each company provides a one-year warranty. Therefore, this round ends in a tie.

After-sales Services

Both domestically and internationally, parts for both machines are commonly accessible. Therefore, you shouldn’t have any issues with the machines’ post-sale support.


The weight of the Compact Path Slayer is 390 lbs and the general Path Slayer is 577 lbs.

Both models from Lane Shark weigh less than 450 lbs.

So, the weights are quite in the same range.

Which one is Better for you : Path Slayer vs Lane Shark

If you are planning to work in ponds, lakes or hillsides – go for the Path Slayer models. Because, these products are solely made for that purpose and are heavy duty. On the other hand, if you are going to work on normal sideways or residential areas, you can opt for Lane Shark models. Because they are more compatible in these situations.


How much is a Lane Shark?

The cost of the Lane Shark LS-2 is 4700 USD, whereas the cost of the LS-3 is 4500 USD.

How much is a Path Slayer?

Compact Path Slayer costs 3500 USD, while the standard version costs 5200 USD.

Is the Path Slayer usable on skid steers?

The Path Slayer models are made solely for use with tractors. They can not be attached to a skid steer.


Both of these products have a lot in common, but they can be in their best forms in the situations they are made for. So, decide first where you will be working with your brush cutter. If that’s clear, then you can easily choose one from above.

Leave a Comment