Ford 1710 is a compact utility tractor with a 26-hp engine. This tractor has an open-center hydraulic system with 4.75 gallons of fuel. It weighs about 2425 to 2690 pounds.
The build quality is excellent and very durable, so you can use it for a long time. Moreover, it is a versatile tractor, and it comes in very handy to make your lawn task easier and faster.
Nevertheless, you might experience a few issues with it now and then. But that is not a big deal as most issues can be resolved with simple solutions. Starting problems, engine problems, hydraulic problems, transmission problems, power shifting problems, overheating problems, electrical problems, clutch problems, etc., are the common problems of the Ford 1710 tractor.
7 Common Problems of Ford 1710:
A tractor is a heavy-duty vehicle. And a heavy-duty vehicle is bound to have a few issues with rough usage. Also, many problems can occur due to user errors as well.
That is why you should handle the tractor by following the user manual.
With proper maintenance and troubleshooting, it is possible to reduce the problems on a large scale. Also, it becomes easier to solve when you know what caused the issue.
So, the common problems of Ford 1710 are discussed below:
1. Starting problem
Starting problems are a very common tractor problem, especially with the Ford models. Users have complained about facing starting issues like- no staring, hard starting, or very slow staring. And there are a lot of reasons behind this issue.
Check the starter; if it is failed, then the tractor will not start. The starter should be replaced in this case. Also, check the battery condition.
If it is too old, then you need to replace the battery. Next, you need to check the connecting wires, and if the wires are damaged for some reason, they would need replacement to work properly.
If none of these are the issues, then check the fuel tank. If there is not enough oil, the tractor will not start.
A blocked fuel filter can also be another reason for not starting. So, check the filters for debris. If you find any, clean them.
2. Engine problem
If you experience that your Ford tractor stops without any notice sometimes, it can happen due to engine issues.
This can happen due to blocked and clogged fuel filters, clogged air filters, fuel contamination, etc.
To solve the issue, you need to check the fuel compartments for any kind of debris. If you find any, clean them with a brush.
Sometimes, when you do not clean the air filter or fuel filter for too long, it becomes so clogged that you can not clean it with a brush. In that case, you would need to replace the fuel filter and air filter.
Check the fuel condition, and if it is too old or contaminated, then it will not work properly. If the fuel is bad, then you need to drain all the fuel and refill the tank with fresh fuel.
3. Hydraulic problem
You might experience a rubbery or spongy feeling and a squeaky noise while driving your tractor. That is usually the outcome of hydraulic issues. Hydraulic failures are the result of air and water contamination.
If the hydraulic fuel comes in contact with different water and air elements, it becomes contaminated. 80-90% of hydraulic failures are caused by air and water pollution.
Both forms of contamination are frequently brought on by defective pumps, system flaws, or temperature problems.
You should keep changing the hydraulic fuel every 50 days. And to remove water from hydraulic fuels, you need to drain it completely, then clean the parts and install clean fluid.
4. Transmission problem
A transmission problem occurs when you fail to move forward or reverse. It can happen due to insufficient power supply and damaged or broken components.
So, make sure to check if there is any failure of any mechanical component, a broken hose, or a clogged filter.
If you find any damaged or malfunctioned mechanical components, you might need to replace them. Also, when the hose is broken, you need to replace that as well.
Finally, check the filters of your tractor. If they are clogged, clean them properly.
5. Overheating problem
Overheating problems are usually caused by low coolant levels.
To solve the issue, you need to top off the coolant level and inspect the cooling system for leaks or weak connections. Because in that situation, the cooling procedure won’t work.
So, fix them. The fan belt should also be checked. The engine cannot cool down if it is worn out or becomes loose. If the belt has to be adjusted or replaced because it is worn, do so. If the radiator is filthy, clean it.
6. Electrical problem
Electrical issues are frequently brought on by a faulty battery. See whether the issue is resolved by charging the battery. Examining the battery posts and wires comes next. Battery performance may suffer if material deposits accumulate.
Additionally, numerous electrical issues might arise from the poor ground.
To solve this, you need to verify all ground connections for corrosion or rust. Wire brushes and emery cloth are used to finish cleaning. Before tightening, lubricate the connection with the dielectric material.
7. Clutch problems
One of the main causes of clutch failure is leaking oil seals, which allows contamination of the clutch parts. The clutch’s ability to operate effectively will be hampered by even a small quantity of pollution.
To solve the issue, you need to always look for oil residue and replace any oil seals that seem dubious.
What engine is in a 1710 Ford tractor?
The Ford 1710 tractor features a liquid cool Shibaura engine that provides 26 horsepower of energy to do all your hard work.
How much does a 1710 Ford tractor weigh?
The Ford 1710 Tractor has a 3-cylinder Shibaura Diesel Engine and is available in optional two-wheel drive and four-wheel drive models that weigh 2470 pounds.
Ford is one of the best brands in the market for vehicles. So, their 1710 tractor is very trustworthy and reliable. Despite their few issues, you can always rely on the Ford tractor for its work efficiency.
However, to reduce the issues, you need to maintain and troubleshoot the tractor properly