6 Common Cub Cadet 5252 Problems and Solutions

The Cub Cadet 5252 is a utility sub tractor from the 5000 series. It is one of the most popular models in the market. This subtractor is powerful as it has a Kohler engine with V-twin gasoline and hydrostatic transmission. Also, it has infinite numbers if forward and reverses gears. Additionally, it has two-post folding ROPS, external twin disc brakes, hydrostatic power steering, and 21.1 liters of fuel.

Nevertheless, the Cub Cadet 5252 can have some issues now or then as this is an old model. Starting problems, steering problems, transmission problems, PTO problems, uneven cuts, vibration problems, etc., are the common problems you might face with the Cub Cadet 5252. But do not worry, because the problems can be resolved easily.

6 Common problems of Cub Cadet 5252:

Due to the workload, any machine or large lawn equipment may occasionally experience issues. To appropriately address the problem, you must identify the precise reason. Additionally, you may save the trouble of calling a repair if you immediately resolve the issue yourself.

So, the common problems of Cub Cadet 5252 are discussed below:

1. Starting problem

Your Cub Cadet tractor might not start for various reasons, such as a loose spark plug connection, clogged air filter, defective fuel pump, poor battery, corrosion on the electrical parts, a dirty carburetor, damaged switches, or a malfunctioning charging system.

Check the spark plug connection. If the plugs are damaged, then replace them. Then check the air filter for clogs. If you find any, clean it properly. Next, you can check the battery. If it is expired or damaged, you will need to replace it. Also, check the other electric parts for corrosion which you need to clean off immediately.

A filthy and damaged carburetor can also cause starting problem, so you must keep the carburetor clean. If your tractor’s starting problem remains, check the tractor’s switches and charging system for damages and malfunction. Replace the switch if it is damaged and if the charging system has malfunctioned, call an expert because this is a risky job, so it must be done very carefully.

2. Steering problem

Because of the steering issue, your tractor can feel hard to turn, not moving issues. It happens due to a lack of fuel in the steering system. Also, damaged steering gear can cause this problem too.

To solve the issue, you need to check the steering system. If there is not enough fuel, then refill it. If you find the steering gear is damaged, then replace it.

3. Transmission problem

When the engine runs at a high idle speed with the transmission in normal position, the tractor will groove slightly forward or backward due to the transmission control rod. A mismatched transmission control rod is the root cause of the hydrostatic transmission issues with Cub Cadet tractors.

To solve the issue, you need to set a stable post or wall in a fixed position against the front of the tractor. You must not move the object against which the tractor rests. Then, rearrange the tractor’s wheels if needed. Make sure both rear wheels are one inch off the ground. Start the tractor and idle it high with the drive control levers in neutral, the parking brake disengaged, and the drive control levers in neutral.

Next, inspect the rear wheels and make sure they are both rotating. If the wheels do not move, turn off the tractor, remove the flange lock nut from its designated transmission control rod, and then remove the hex screw with the hex screwdriver. Afterward, start the tractor and check the rear wheels for rotation of the affected wheel. If this does not solve the problem, seek help from an expert.

4. PTO problem

PTO problems are often caused by user misuse and wrong installation. Another reason for the PTO problem is the faulty switch. If your Cub Cadet tractor’s solenoid or the clutches are defective, then the PTO will not get enough power, and the engine or tractor blades will not engage. So, make sure to check the Solenoid and clutch condition. If they are defective, replace them as they are not repairable.

5. Uneven cuts

If your Cub Cadet tractor produces uneven cuts, check the blade. Blades can worn out if you do not sharpen them for a long time. You can sharpen dull blades, but when the blades are damaged and worn out, you will need to replace them with new ones if you want even cuts.

6. Vibration problem

Your tractor can vibrate due to a lot of reasons. Faulty housings, imbalance blades, worn-out deck blades, worn idler and spring, faulty mounting bolts, lack of tire pressure, debris caught in the tractor, etc., are the main reasons the tractor is causing excessive vibration.

To solve the vibrating problem, check the housing. If it is damaged, replace it with a new one. Then check the blade condition. Sharpen them if they are dull, and if they are damaged, then replace them. You should also check the tires if they are of the correct size. Make sure the tire pressure is in a safe position, and ensure that you do not forget the regular maintenance of your tractor.

Frequently asked questions

Why won’t my Cub Cadet go in forward or reverse?

If the tensioner pulley is worn, the spring is stretched or missing, the transmission bypass lever is engaged, the pump belt is loose, worn, or broken, the hydraulic oil is hot, old, or at an inadequate level, or air is trapped in the hydraulic system, the Cub Cadet tractor would not move in any way.

How often should you change the oil in a Cub Cadet?

You should change the engine oil of your Cub Cadet tractor before putting your tractor in storage. After the first five hours of usage, a new engine requires its first oil change.

Final Words

The Cub Cadet tractor is one of the best tractor brands in the market. They have been in the market for a long time, making them reputable and reliable. However, as a user of the Cub Cadet 5252 model, you should know about its demerits to solve them efficiently.

Leave a Comment