5 Common Case TR270 Problems – With Brief Solutions And Causes

As per the opinions of Case TR270 compact truck loader users, it is a good deal for the money. It does not show many problems but a few general ones that almost all compact truck skid steers loader have.

Some of the common Case TR270 problems are Oil leak from the engine, Hydraulic problems, Won’t start, Changing from bucket to a grapple, and Code 5217.

Now, we’ve focused on resolving all of the most common issues with this loader. As a result, you’ll be well-prepared to deal with them on your own.

Case TR270 Problems and Solutions at a Glimpse:

ProblemSolution
Oil leakKeep the belly pan clean
Hydraulic problemInspect the hydraulic filter
Won’t start toInspect the wiring harness and connector pins
Changing from bucket to a grappleCheck your manual
Code 5217Check your joystick wiring

1. Oil leak problem.

Similar problems have been observed with all track-type skid steer loaders. The main reason is dirt on the belly plan.

Solution:

  1. Remove the engine.
  2. Fit a new oil pan.
  3. Clean the belly.
  4. Remove the drain hose.
  5. Put the engine back in its position.

2. Hydraulic problem.

The loader moves but the hydraulic don’t work. The parking indicator stays on all the time but there are no visible faulty codes. If that’s the problem, let’s hop onto the solution.

Solution:

There are a few things to keep in mind here at first. This may be electrical, but it’s also possible that it’s hydraulic or mechanical.

Make sure the engine is turning the pump drive coupling between the engine and the hydraulic pumps with hydrostatic drive. Internally inspect the hydraulic filter for fine metal or debris, which could indicate a hydrostatic drive or hydraulic pump/component failure.

It will appear in the oil and filter as fine glitter if it is present. If this is discovered in the oil or filter, no further troubleshooting is required beyond determining which component or components are failing.

3. Won’t start.

The seat is locked, the door is closed, and the armrest is lowered. Still, waiting for a response? 

Use a voltage tester to probe the top two metal tabs of each fuse while replacing any fuse that only has power on one side with the ignition switch turned on. If you don’t have a relay tester, swap your relays one at a time with a known good one for testing purposes.

We also recommend double-checking that the battery and charging system are in good working order and free of any issues that could cause the machine to lose voltage.

4. Changing from bucket to grapple.

We see you changed the attachments properly, but it is not working anyways. Only one thing can solve this problem, THE MANUAL.

5. The loader is showing code 5217.

5217 Is Ground Drive fault, joystick out of range. The problem is not that major and can be fixed by yourself easily.

Solution:

We’d tighten any connections that might prevent the safety interlock switches from working properly, and inspect the wiring harness and connector pins for any damage or corrosion.

Check for corrosion or damage in your joystick wiring and connectors. If recalibration fails, it’s likely that the joystick control is faulty and needs to be replaced.

What engine is in a case TR270?

Despite its small size, the TR270 is powered by a powerful Tier 4 Final CEGR engine that produces more power while meeting Tier 4 Final emissions regulations. You can go all day without refueling thanks to the 19.5-gallon fuel tank.

How much horsepower is a case TR270?

The Case TR270 offers 74 horsepowers.

How wide is a case TR270?

It won’t disrupt ground conditions and fits easily on most trailers, measuring less than 66 inches (1.68 m) wide and weighing only 8,270 lb (3 750 kg).

How much can a case TR270 skid loader lift?

The Case TR270 has a rated operating capacity of 2700 pounds.

Moving To The Closure

We’ve just looked into all the most common Case TR270 problems and managed to find the most effective responses for you.

Surprisingly, the loader does not exhibit many flaws. The most common issues, on the other hand, are not difficult to tackle.

If you are having trouble solving it, kindly call the distributor for support. The majority of issues are self-resolvable, so follow our guidance and get your skid steer back up and running!

Leave a Comment