7 Common Can-Am Ryker Problems and Solutions

Can-Am Ryker
Image Credit: cycleworld

Ryker is the perfect vehicle for those who want both a bike and a car. It combines the comfort of a car with the fast and rough driving of a bike. It is an off-road vehicle that you can never get tired of. However, in spite of being the popular off road vehicle, Can-Am Ryker can have some problems now and then.

So whether you are facing the problem right now or you are thinking about buying the Can-Am Ryker, knowing the solution will fix your problems in no time.

Thus, this article will provide tips on how to solve some of the common problems encountered by Can-Am Ryker.

Common Can-Am Ryker Problems:

  1. Excessive Heat
  2. Wiring Problems
  3. Radius Rod Issues
  4. Reservoirs of Antifreeze
  5. Problems With Brake
  6. Regular Maintenance Is Essential
  7. Ignition Problem
  8. Problems With The Front And Rear Knuckles

Can-Am Ryker Problems And Solutions:

Utility vehicles may have problems, but that does not mean you should not buy them. Knowing all the disadvantages of a new product before buying it is essential to comprehend what you are paying for. Also, when you face a problem you will need proper solutions to that. So, the common problems of Can-Am Ryker and the solutions are given below:

1. Excessive Heat

Utility vehicles handle rough rides, so it is very common for them to produce heat. But when this becomes excessive, users have trouble sitting in the driver’s seat as the leg space becomes very hot. This is quite a problem. Due to the horizontal orientation of the exhaust pipe, extreme heat occurs.

Solution

Although excessive heat seems like a serious problem, the solution for this is quite easy. All you need to do is place the header wrap around your exhaust pipe. As the header wrap is heat resistant it will absorb the heat. Heat shields can be used to reduce radiant heat up to 70%.

2. Wiring Problems

The reason for the wiring problems occurs because the wires do not have a very long lifespan. Thus, your wiring near the front wheels might be slack and could be striking the spinning rods. It can also disrupt the signal between the control panel and wheels resulting in brake failure.

Solution

When you face wiring problems, the best solution is to replace them with the proper wire models with the help of an expert unless you are the expert. Also, Ryker kits often require further wiring or an extension kit in order to be used. Make sure to choose the right one for your Ryker series and model.

3. Radius Rod Issues

The wheels are also not visible with the standard radius rods. That makes you drive through sharp edges without noticing what damage you will be facing. So, after your rough rides, you will find your wheels damned because of the radius rod.

Solution

You can replace the radius rods with new Ryker radius rod replacements, as they have made their new radius rods with more durability and strength that prevents harm to the wheels.

4. Reservoirs of Antifreeze

Leaking of Antifreeze reservoirs is an uncommon but serious issue if you face this problem while driving your riker. Liquids in the Antifreeze Reservoir might leak out onto the wires.that might cause a very messy problem.

Solution

Antifreeze, or coolant, is vital to maintaining the temperature of your vehicle. Also, it is highly hazardous and required to stay within closed compartments. But when it is leaked then you should try replacing the radiator cap.

5. Problems With Brake

There is nothing more serious than problems with brakes. A brake problem can lead to horrible accidents and even death. If you do not have enough brake fluid in your bike, you may end up experiencing a total breakdown. So, be careful to always have enough brake fluid in your bike.

Solution

You need to use alternative brakes to stop if your front brakes fail. You may reduce your speed by rolling off the gas and downshifting as much as you can if both of your braking systems fail. Make sure to troubleshoot brake problems every time before you ride on the roads.

6. Regular Maintenance Is Essential

Few people have the time to maintain their Can-Am Ryker on a regular basis due to their busy schedules. Regular maintenance is often the best way to prevent many problems. However, it sure becomes a problem in a busy life.

Solution

There is no alternative solution for regular maintenance. Because only regular maintenance can save you from problems like brake failure.

7. Ignition Problem

Ignition problems mean problems with starting your vehicle and this usually happens because of faulty ignition switches or not enough fuel in the engine.

Solution

Troubleshoot starting problems. If you find problems in the ignition switch then you should replace it and if you find not enough fuel then refill it before your off road rides.

8. Problems With The Front And Rear Knuckles

The rear knuckles of Can-Am Ryker fails to provide the quality they claim to. Thus, it has been reported by many users that knuckles tend to bend and have wheel bearing issues.

Solution

As the quality is compromised here, you have no other choice than replace the rear knuckles, as the front knuckle. In recent years, Can-Am has updated their knuckle quality so, you can replace them with better knuckles according to your Ryker model too.

Final Words

The Can-Am Ryker is the three wheeler that can provide you with the most adventurous off road experience. In spite of that, you should be aware of the common problems listed above; if you encounter them, this article has provided the solutions that you can follow.

Leave a Comment